Have a question?
Pipe Positioning and Alignment Clamps
Kela Clamp 16-63mm
The Kela clamp from Ritmo is a universal and compact aligner suitable for plastic pipes, fittings and electrofusion saddles. Thanks to its clamp design, it is possible to align pipes and fittings in a straight position or at 45° and 90°.
Kela is equipped with two plates: a wide and a narrow one, to be used for different install scenarios. The wide plates are used for the straight alignment and give a better grip and positioning, while the narrow plates are designed to make Kela more compact and therefore easier to use in the 45° and 90° application, as well as in narrow working conditions or electrofusion saddles welding. Comes with a quality carry case.
Standard Composition
- Aligner as shown for 45/90deg and straight alignments
- Carry Case
Technical Features
Code | 9960-1663R |
Working Range | 16mm - 63 mm |
Type of welds | Straight, 45°, 90° |
| Max Dimensions | 298 x 126 x 153mm |
| Weight | 1.4 kg |
Ritmo Aligner Eco 63-180mm Clamp
The Aligner Eco 63-180mm is an essential and professional tool for the alignment and support of PE pipes during electrofusion for sizes 63mm to 180mm.
The Aligner Eco is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes. The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 30°, 45°, 90°, “in line” and T welding.
Axes have V-shaped clamps positioned on them, which are equipped with pipe fastening belts. The system, along with fixing the pipe to the clamp, serves also as a centering device.
Each axis has 2 guides on which the clamps are able to slide.
The aligner is available in two configurations: 2 axes and 3 axes (to weld T fittings).
Standard Composition
- Straight alignment clamp complete with 4 clamps
- Service spanner
- Carry Case
Technical Features
Code | 9960-6318 |
Working Range | Ø 63 ÷ 180 mm |
Type of welds | 30° - 45° - 90° - in line - Ts |
| Dimensions 2 axes version | 915 x 140 x 130mm |
| Dimensions 3 axes version | 915 x 575 x 130 mm |
| Weight 2 axes version | 7.5 Kg |
| Weight 3 axes version | 10 Kg |
Ritmo Universal Aligner 20-63mm Clamp
The Universal Aligner is a professional tool is essential to hold PE pipes still and aligned during electrofusion.
The Universal Aligner 63 is made almost entirely in a special Aluminium alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters. The possibility to remove one part of the axis that carries the clamps and one clamp itself, allows the use of tapping tees during the fusion.
Standard Composition
- Aligner complete with four clamps
- Service spanner
- Carry Bag
Technical Features
Code | 9960-2063R |
Working range | Ø 20 ÷ 63 mm |
| Max Overall Dimensions | 600 x 160 x 116 mm |
| Transport Bag | 440 x 190 x 140 mm |
| Weight aligner | 3.40 Kg |
| Weight Bag | 0.5 Kg |
Ritmo Aligner 125-500mm Clamp
The Aligner 125-500 is an essential and professional tool for the alignment and support of pipes during electrofusion from 125mm to 500mm. These are very popular with PE pipe installers throughout NZ.
The Aligner is entirely made of steel, featuring a central adjustable joint and pipe fastening clamps fixed on axes. The adjustable joint can be set on 4 different working positions to allow welding at preset angles such as 45°, 90°, “in line” and T welding.
Axes have V-shaped clamps positioned on them, which are equipped with pipe fastening belts. The system, along with fixing the pipe to the clamp, serves also as a centering device.
Each axis has 2 guides on which the clamps are able to slide along the frame.
Practical side handles ensure an easy grip during movement and positioning, both during welding procedures, and preparation.
The aligner is available in two configurations: 2 axes and 3 axes (to weld T fittings).
Standard Composition
- Straight alignment clamp complete with 4 clamps
- Service spanner
- Provided in wooden crate for transport
Technical Features
Code | 9960-0500 |
Working range | Ø 125 ÷ 500 mm |
| For welding | 45° - 90° - in line - T |
| Dimensions 2 axes version | 1815 x 610 x 410 mm |
| Dimensions 3 axes version | 1815 x 1230 x 410 mm |
| Weight 2 axes version | 38 Kg |
| Weight 3 axes version | 52 Kg |
