Saddle Scrapers

PatchMaster Mono and PatchMaster Multi 

The PatchMaster Mono scrapers are an easy solution for removing the outer oxidised layer of PE pipe to prepare for welding on an Electrofusion tapping or branch saddle. The scraper is hinged and once locked onto the pipe, the tool rotates around the circumference on bearings.

PatchMaster Mono scrapers are size specific. The low profile & lightweight composition makes them ideal for use in tight spaces. All units have long-life blades which can be rotated during lifetime of the tool with the blades having 4 sides.

These come in a heavy duty plastic case for storing your tool and transport.

Replacement blades and spare parts stocked by UPG.

Size Range

Pipe Scrapers – RTC

These professional rotary scrapers, designed and patented by Ritmo, are essential to prepare the plastic pipes and fittings before electrofusion welding.

Practical and handy, the pipe scrapers remove the oxidation layer caused by weather and ultraviolet rays. If not removed, the oxidation layer would severely compromise the quality of the joint.

Among the main construction features there is a device that makes it possible to maintain the thickness of the continuous chip constant, even if the pipe is misshaped, and to adjust the length of the surface to scrape according to the depth of the electrical coupler.

The RTC 710 features an extendable arm to scrape the exact length of the electrical coupler, which is an advantage
when having to perform maintenance/repair jobs in the building site. The main chuck has four extendable arms that clamps directly the inside diameter of the pipe.

Standard Composition

– Pipe scraper
– Adaptors kit (except for RTC 710)
– Spare blade
– Handwheel key (for RTC 315)
– Aluminum transport case
– Screwdriver and small cutter

Manual Scraper

This manual tool is used with the same principle as the RTC pipe scrapers. The MANUAL SCRAPER features a practical plastic handle and a blade. Recommended work range max. Ø 63 mm (2”)

PIPE SCRAPERS – PS

Professional rotary scrapers, essential to prepare the plastic pipes and fittings before electrofusion welding. The tools has an adjustable chuck covering all the Ø of the working range, and a blade holder orbital arm. The PS series guarantees a constant and regular removal of the shaving. The scrapers blade holder permits the scraping of the entire electrical sleeve’s lenght, most useful when doing on site repairs.

Standard Composition

– PS 180 supplied with transport bag and spare blade
– PS 400 supplied with transport case and spare blade

Technical Features

Elektra S – Electrofusion Machine

Elektra M

Elektra XL

Other Products

Static overlay